@article {445,
	title = {Purification and characterization of OmcZ, an outer-surface, octaheme c-type cytochrome essential for optimal current production by Geobacter sulfurreducens.},
	journal = {Appl Environ Microbiol},
	volume = {76},
	year = {2010},
	month = {2010 Jun},
	pages = {3999-4007},
	abstract = {Previous studies have demonstrated that Geobacter sulfurreducens requires the c-type cytochrome OmcZ, which is present in large (OmcZ(L); 50-kDa) and small (OmcZ(S); 30-kDa) forms, for optimal current production in microbial fuel cells. This protein was further characterized to aid in understanding its role in current production. Subcellular-localization studies suggested that OmcZ(S) was the predominant extracellular form of OmcZ. N- and C-terminal amino acid sequence analysis of purified OmcZ(S) and molecular weight measurements indicated that OmcZ(S) is a cleaved product of OmcZ(L) retaining all 8 hemes, including 1 heme with the unusual c-type heme-binding motif CX(14)CH. The purified OmcZ(S) was remarkably thermally stable (thermal-denaturing temperature, 94.2 degrees C). Redox titration analysis revealed that the midpoint reduction potential of OmcZ(S) is approximately -220 mV (versus the standard hydrogen electrode [SHE]) with nonequivalent heme groups that cover a large reduction potential range (-420 to -60 mV). OmcZ(S) transferred electrons in vitro to a diversity of potential extracellular electron acceptors, such as Fe(III) citrate, U(VI), Cr(VI), Au(III), Mn(IV) oxide, and the humic substance analogue anthraquinone-2,6-disulfonate, but not Fe(III) oxide. The biochemical properties and extracellular localization of OmcZ suggest that it is well suited for promoting electron transfer in current-producing biofilms of G. sulfurreducens.},
	keywords = {Binding Sites, Bioelectric Energy Sources, Cytochromes c, Electricity, Electron Transport, Geobacter, Heme, Hot Temperature, Molecular Sequence Data, Molecular Weight, Oxidation-Reduction, Protein Binding, Protein Stability, Sequence Alignment, Sequence Analysis, Protein},
	issn = {1098-5336},
	doi = {10.1128/AEM.00027-10},
	author = {Inoue, Kengo and Qian, Xinlei and Morgado, Leonor and Kim, Byoung-Chan and Mester, T{\"u}nde and Izallalen, Mounir and Salgueiro, Carlos A and Lovley, Derek R}
}
@article {462,
	title = {Anode biofilm transcriptomics reveals outer surface components essential for high density current production in Geobacter sulfurreducens fuel cells.},
	journal = {PLoS One},
	volume = {4},
	year = {2009},
	month = {2009},
	pages = {e5628},
	abstract = {The mechanisms by which Geobacter sulfurreducens transfers electrons through relatively thick (>50 microm) biofilms to electrodes acting as a sole electron acceptor were investigated. Biofilms of Geobacter sulfurreducens were grown either in flow-through systems with graphite anodes as the electron acceptor or on the same graphite surface, but with fumarate as the sole electron acceptor. Fumarate-grown biofilms were not immediately capable of significant current production, suggesting substantial physiological differences from current-producing biofilms. Microarray analysis revealed 13 genes in current-harvesting biofilms that had significantly higher transcript levels. The greatest increases were for pilA, the gene immediately downstream of pilA, and the genes for two outer c-type membrane cytochromes, OmcB and OmcZ. Down-regulated genes included the genes for the outer-membrane c-type cytochromes, OmcS and OmcT. Results of quantitative RT-PCR of gene transcript levels during biofilm growth were consistent with microarray results. OmcZ and the outer-surface c-type cytochrome, OmcE, were more abundant and OmcS was less abundant in current-harvesting cells. Strains in which pilA, the gene immediately downstream from pilA, omcB, omcS, omcE, or omcZ was deleted demonstrated that only deletion of pilA or omcZ severely inhibited current production and biofilm formation in current-harvesting mode. In contrast, these gene deletions had no impact on biofilm formation on graphite surfaces when fumarate served as the electron acceptor. These results suggest that biofilms grown harvesting current are specifically poised for electron transfer to electrodes and that, in addition to pili, OmcZ is a key component in electron transfer through differentiated G. sulfurreducens biofilms to electrodes.},
	keywords = {Amino Acid Sequence, Bacterial Outer Membrane Proteins, Bioelectric Energy Sources, Biofilms, Cytochromes, Electrodes, Electron Transport, Fumarates, Gene Deletion, Gene Expression Profiling, Gene Expression Regulation, Bacterial, Genetic Complementation Test, Geobacter, Microscopy, Confocal, Molecular Sequence Data, Oligonucleotide Array Sequence Analysis, Oxidation-Reduction, RNA, Messenger, Up-Regulation},
	issn = {1932-6203},
	doi = {10.1371/journal.pone.0005628},
	author = {Nevin, Kelly P and Kim, Byoung-Chan and Glaven, Richard H and Johnson, Jessica P and Woodard, Trevor L and Meth{\'e}, Barbara A and Didonato, Raymond J and Covalla, Sean F and Franks, Ashley E and Liu, Anna and Lovley, Derek R}
}
@article {460,
	title = {Selection of a variant of Geobacter sulfurreducens with enhanced capacity for current production in microbial fuel cells.},
	journal = {Biosens Bioelectron},
	volume = {24},
	year = {2009},
	month = {2009 Aug 15},
	pages = {3498-503},
	abstract = {Geobacter sulfurreducens produces current densities in microbial fuel cells that are among the highest known for pure cultures. The possibility of adapting this organism to produce even higher current densities was evaluated. A system in which a graphite anode was poised at -400 mV (versus Ag/AgCl) was inoculated with the wild-type strain of G. sulfurreducens, strain DL-1. An isolate, designated strain KN400, was recovered from the biofilm after 5 months of growth on the electrode. KN400 was much more effective in current production than strain DL-1. This was apparent with anodes poised at -400 mV, as well as in systems run in true fuel cell mode. KN400 had current (7.6A/m(2)) and power (3.9 W/m(2)) densities that respectively were substantially higher than those of DL1 (1.4A/m(2) and 0.5 W/m(2)). On a per cell basis KN400 was more effective in current production than DL1, requiring thinner biofilms to make equivalent current. The enhanced capacity for current production in KN400 was associated with a greater abundance of electrically conductive microbial nanowires than DL1 and lower internal resistance (0.015 versus 0.130 Omega/m(2)) and mass transfer limitation in KN400 fuel cells. KN400 produced flagella, whereas DL1 does not. Surprisingly, KN400 had much less outer-surface c-type cytochromes than DL1. KN400 also had a greater propensity to form biofilms on glass or graphite than DL1, even when growing with the soluble electron acceptor, fumarate. These results demonstrate that it is possible to enhance the ability of microorganisms to electrochemically interact with electrodes with the appropriate selective pressure and that improved current production is associated with clear differences in the properties of the outer surface of the cell that may provide insights into the mechanisms for microbe-electrode interactions.},
	keywords = {Bioelectric Energy Sources, Electrochemistry, Equipment Design, Equipment Failure Analysis, Geobacter, Species Specificity},
	issn = {1873-4235},
	doi = {10.1016/j.bios.2009.05.004},
	author = {Yi, Hana and Nevin, Kelly P and Kim, Byoung-Chan and Franks, Ashely E and Klimes, Anna and Tender, Leonard M and Lovley, Derek R}
}
